PC Class ATS Automatic Transfer Power Changeover Switch 4P Three Positions Socomec
Product Details
| Product Name: | Dual Power Automatic Transfer Switch ATS | Max. Voltage: | 690V |
|---|---|---|---|
| Control Power Supply Voltage: | 400V, 380V, 220V, 480V | Pole: | 4P |
| Current: | 400A | Operation Type: | Manual |
| Voltage: | 63A | Standard: | IEC60947-6-1 |
| Highlight |
Three Positions Socomec Automatic Transfer Switch,PC Class ATS Automatic Transfer Switch,Automatic Transfer Power Changeover Switch |
||
Product Description
PC class 4P Three Positions Socomec automatic transfer power Changeover Switch
PC-Class dual-power supply automatic switch(here in after ATSE) is the latest company Technology development of high-tech products. It is line with GB/T14048.1-2006,GB/T14047.11-2002 superscript. And also with “high-rise buildings fire norms” and “Architectural Design fire norms”, "Emergency Lighting Design Guide” “civil electrical design specifications”
Small in volume, convenient in installation
- Self-input and self-restoring, Self-input without self-restoring, automatic or manual is all depends on you.
- You can choose integral type or split type
- 2 Pole,3 Pole,4 Pole all you can choose
- Running parameter could be adjusted
- Rated voltage of 400V,rated current is from 16Amp to 3200Amp
Automatic transfer switch Application:
- Automatic transfer switch mainly used for distribution or electromotor network, which under voltage 220V/380V/400V, Rated current 16A-3200A.
- Main power and standby power or mutual standby power change over system or city power and generator. Utility to Utility or Utility to Generator
- Widely used at the field of important power supply site, which transport, high-rise building,
industrial assembly line, television stations need electricity for the important parts. Main power Emergency Power can be power grids, with Self-excitation generator sets, battery, and so on.
Structure and characteristic
Splited Modular Genset Manual ATSE is composed of switch body and controller. Adopt the electromaghetic driver, the working power of controller transfer is based on the main power and the standby power. AC 220V power supply, without additional source. Switch body have an electrical or mechanical switch instruction as an isolation indicator switch.
| Model | YES1-32C | YES1-40C | YES1-63C | YES1-125C | |||||||||
| Rated current(A) | 25,32 | 40 | 63 | 125 | |||||||||
| Opearting current(A) | 3.5 | ||||||||||||
| Rated short time current(KA) | 5 | ||||||||||||
| Service Life | Mechanical | 8000 | |||||||||||
| Electric | 3000 | ||||||||||||
| Pole | 2P | 3P | 4P | 2P | 3P | 4P | 2P | 3P | 4P | 2P | 3P | 4P | |
| Weight(KG) | 3.2 | 3.7 | 4.2 | 4 | 4.5 | 5.5 | 4 | 4.5 | 5.5 | 4 | 4.5 | 5.5 | |
| Operating Cycle(s/time) | 10 |
||||||||||||
Normal running time and installation conditions
1.Ambient air temperature
Temperature should be within -5℃~40℃, and the average temperature within 24h should not exceed 35℃.
2.Altitude
Altitude of the installation site should not exceed 2000m.
3.Atmospheric conditions
The relative humidity of the installation site should not exceed 50% at maximum temperature 40℃, and it will be higher at minimum temperature -5℃, for instance, 90% at +20℃. Please take measures for the dew on product surface caused by temperature change.
4.Class of pollution
Pollution class of ATS meets the specified level of GB/T14048.11.
5.Installation category
Installation category of ATS meets the specified category in GB/T14048.11
Matterts need attention
1.Manual/automatic operation
ATS with automatic operation can ensure power generation and power-off performances, but for ATS with manual operation , it cannot ensure the above performance due to the speed of power generation and power-off or operator differences. Excessive silver alloy loss may occur during manual power generation and power down. Therefore, set the selector switch at the manual position under normal condition, and pull it to the manual position when all power is turned off to check and maintain the operating system and contacts. After the manual operation is completed pull the selector back to the automatic position.
2.Control circuit
ATS will be active in an instant. After the conversion is complete, the coils in the control circuit are disconnected by the internal converter. The coil can operate normally with a rated voltage of 80%~110%, and too low voltage may cause the coil to heat up or even ignite.
Product Highlights
PC class 4P Three Positions Socomec automatic transfer power Changeover Switch PC-Class dual-power supply automatic switch(here in after ATSE) is the latest company Technology development of high-tech products. It is line with GB/T14048.1-2006,GB/T14047.11-2002 superscript. And also with “high-rise ...
Ready To Install Type MCB Distribution Box RCCB RCBO For Home AC220~240V Incoming 63A
Ready to Install Type A Distribution Box with MCB, RCCB or RCBO Custom for Home Use AC220~240V Incoming 63A Material: ABS/PC Color: Grey White/Transparent Cover Application: Power Distributing Type: Distribution Box Electrical Boxes Installation Type: Surface Type/ Flush Type Standard: IEC60439-3 ...
6kA Electric Circuit Breaker , 2 Pole Circuit Breaker 1~63A 1P 3P 4P 1P+N
Osmart OSMC32N 6kA Schneider Electric Miniature Circuit Breaker 1~63A, 1P,2P,3P,4P,1P+N in compliance with IEC-EN60898 Osmart OSMC32N MCBs Schneider Electric Original Made In China Miniature Circuit Breakers up to 63 A characteristic * Product standard: GB10963.1/IEC 60898 * Product Certification: ...
Single RGB Inflatable Led Light Color Changing , Events Lighting Balloon Led Lantern Lights
Single RGB LED lighting Source Muse™130C Events Lighting Balloon with 72w/96w Color Changing LED 1. General features Smart Color LED changer balloon light Muse-Color Dual White, Muse-Color RGB+CCTpowered by LED bulb 72w, max 96w Print your company logo or event name on our giant advertising balloon ...
Digital Setting Modular Timing Relays AC DC 12V 24V
RT8-K Digital Setting Timer Relay AC DC 12V 24V 220V 230V Multifunction Time Delay on off Relay General Multifunctional time relay with digital settings can be used for industrial equipment, lighting control, heating element control, motor and fan control. It has four delay modes and the delay range ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
