PVDF DuPont Dow Ultrafiltration Membrane Modules SFP 2860XP / SFD 2860XP 2.0 – 8.5 M³/hr
The specific advantages are as follows:
1. Dow ultrafiltration membrane has an ultra-small pore size, which can efficiently remove particulate matter, bacteria, most viruses and colloids, and combined with uniform membrane space and external pressure structure, it can ensure that the components can still guarantee efficient and stable operation under a variety of complex water quality conditions. When the pressure increases, it can be cleaned and maintained by backwashing and air washing to extend the life of the membrane.
2. The pore size of the ultrafiltration membrane is ultra-small, ensuring efficient filtration and the water quality meets the water use standard. The sterilization rate can reach 99.99%.
3. The material is super strong and can extend the service life. The unique double-layer structure membrane has strong chemical resistance and is enough to resist the erosion of strong acids and alkalis. The mechanical strength is high and not easy to break.
4. The structure has strong pressure resistance and can ensure continuous low-energy consumption and stable operation. The Dow ultrafiltration membrane has an external pressure structure, a larger filtration area, low water inlet requirements, and a wider range of suitable raw water. The external pressure membrane is not easy to clog, the cleaning frequency is greatly reduced, and energy consumption and cost are saved.
The Dow membrane has obtained the international drinking water standard certification (NSF61 certification) and has become the preferred membrane element in the water treatment industry.
Product Specifications
|
Membrane area
|
Module volume
|
Weight
(empty/ water filled) |
| Model |
Type |
/ |
m2 |
ft2 |
Liters |
Gallons |
Kg/lbs |
Kg/lbs |
| SFP-2860XP |
Industrial |
|
51 |
549 |
35 |
9.3 |
48/83 |
106/183 |
| SFD-2860XP |
NSF/ANSI 61 and 419 |
|
51 |
549 |
35 |
9.3 |
48/83 |
106/183 |
Figure 1: SFP and SFD 2860XP (8-inch diameter)
| Properties |
|
Length |
|
|
Diameter |
Width |
|
| Units |
L |
L1 |
L2 |
L3 |
D |
W1 |
W2 |
| SI (mm) |
1860 |
1500 |
1630 |
1820 |
225 |
180 |
342 |
Operating Parameters
| |
SI units |
US units |
| Filtrate Flux @ 25ºC |
40-110 l/m2/ hr |
24-65 gfd |
| Flow range |
2.0 – 8.5 m3/hr |
8.8 – 37.4 gpm |
| Temperature |
1-40ºC |
34-104ºF |
| Max. inlet module pressure (@ 20ºC) |
6.25 bar |
90.65 psi |
| Max. operating TMP |
2.1 bar |
30.5 psi |
| Max operating air scour flow |
12 nm3/hr |
7.1 scfm |
| Max backwash pressure |
2.5 bar |
36 psi |
| Operating pH |
2- 11 |
| NaOCl (max.) |
2,000 mg/L |
| Particle size (max.) |
300 µm |
| Flow configuration |
Outside in,dead end flow |
| Expected filtrate turbidity |
≤0.1 NTU |
| Expected filtrate SDI |
≤2.5 |
| / |
|
| / |
|
The difference between 28XX and 26XX
MODULE INSTALLATION
For application cases, please click:https://www.fgwater.com/Industries/
For detailed parameters, please visit:
About Us
FG Water Technologies (www.fgwater.com) is now an organic part of Wuxi Fenigal Science and Technology Co. Ltd., which is a high-tech entity integrating water treatment quipment design, manufacturing, trading and shipment served for main industrial sectors.
HAFE-FG Water Technologies has focused on the research of water treatment technology, equipment development and manufacturing, testing and international shipment etc. We work with many leading large-scale or small-medium original equipment manufacturers in China High-tech Development Zones, and engaged ourselves in R&D, manufacturing, and quality testing.
Our main products include a variety of water purification and different treatment equipment, such as seawater reverse osmosis (SWRO) system, brackish water rever osmosis (BWRO), ultrafiltration (UF)system, Electrodeionization/EDI equipment, media pressure filters and ion exchanger softeners. So far, our company has become a major water treatment equipment supplier for food and beverage industry, pharmaceutical industry, chemical industry, electric power industry, urban water supply industry, municipal and industrial wastewater treatment and more industries, as well as being an exporter to more than 20 countries and regions in Asia, Europe, the Americas, Africa, etc.
OUR CLIENTS
PRODUCTION SYSTEM
Our production system consist of a list of industry-specialized partnership factories accross China. Some of them singularly cover an area of over 10,000 square meters, including 5,000 square meters of workshop and warehouse and 1,500 square meters of office buildings. All of our technical staff has more than 10 years of experience in the design of water treatment systems, so we are able to provide the perfect solution for all kinds of water purification and sewage treatment applications.
Since the establishment, the Company has always regarded quality as the life of our business. We choose the best components only for the production of various water treatment systems. Our systems are easy to use and maintain, and they stays highly reliable even under toughest conditions.
